Answer this question: How is AIM relevant to your business?
Automated Infrastructure Management is a meld of hardware and software that manages the entire physical layer of the network. The software component documents the cabling infrastructure in the network, including connected equipment, and provides a comprehensive view of device location, circuit health and service on that circuit in real time.
If your business needs this level of infrastructure awareness you can benefit from our experience and the insights gained from deploying multiple solutions in hospitals across Ontario with our partners and solution providers.
We recommend the robust and reliable imVision Solution from CommScope.
Answer this question: Make the case for Air Blown Fiber?
Air Blown Fiber is the process of blowing a cable through a duct while simultaneously pushing the cable into the duct. Compressed air is injected at the duct inlet and flows through the duct and along the cable at high speed, allowing the cable to levitate within the tube.
As a result longer installation distances can be reached despite bends and undulations in duct. Forces exerted on the cable are lower and the equipment is needed only at one end of the duct route.
In addition to these advantages the main value proposition for air blown fiber has been centered around the cost savings for future fiber additions and upgrades to previous installs. Typically, a client would see advantages on the third iteration. However we recommend the eABF solutuin which has proven to provide cost savings from the very next iteration.
Answer this question: How are we relevant to your small business needs?
Let us help you put together a reliable, fast, optimized and secured network for your small business. We perform the site survey, put together a plan and execute it for a turn key solution, quickly.
transportation
medical offices
pharmacies
garages
bars
restaurants
clubs
salons
lawyers
accountants
and many more..
We can help source and deploy the hardware to support staff needs as well as client engagement and marketing with
cabling
network gear
LAN cabinet setup
switch and security
cameras
digital signage
pones and computers
websites
Call us to see how we can help you becomes more connected and engaged with your customers - in store and online!
As customers demand and expect more bandwidth providers and enterprises are looking for creative ways to reduce costs while delivering on services. A graceful migration path from copper to fiber while maintaining the investments in network infrastructure is by using and deploying GPON. We have hands on experience deploying solutions from Tellabs & Ubiquiti. We can help
Design
Cable
Dress & Terminate
Splice
Patch & Label
Test & Certify
Troubleshoot & Repair
Audit, Document & Clean-up
Extend & Expand existing deployments
Optical fiber offers unmatched bandwidth and distance advantages and will undoubtedly be a key component in the networks of the future. Combining optical fiber with higher-power solutions via composite cable provides a robust extension to traditional PoE systems,
Applications environments include
campus
cities
airport
large estates
The technology extends power and connectivity to
PTZ camera with a heater POE to 650 m, 60 watts
WiFi hotspot POE to 3 km, 15 watts
Camera POE to 1.6 km, 30 watts
Camera POE+ to 650 m, 60 watts
Digital Signage
Small Cells
Optical LAN
POE Phones deployed remotely
Answer this question: Why do businesses invest in cameras?
As you invest in a security and surveillance system let us help steer you in a different direction, away from the traditional use of camera's as a security device to cameras used as sensors gathering data for business intelligence.
We want to be your choice of partner to put parts or the whole solution together. We can help with the design, cabling, camera deployment, and even creating the business intelligence use cases.
Cisco Meraki MV is our platform choice of as its simple to deploy, configure, manage and provides reliable security and valuable business insights to organizations of any scale.
Answer this question: Why do businesses need Smart Hands?
Deploy Smart Hands to work with your Level 2 support team instead of sending specialists out to the field on trips that are both time consuming and costly.
Equipment Installation Services
Cabling Services
Rack and Stack Services
Troubleshooting
Remote Management
Logistics Support
Asset Management
Answer this question: What services do we provide in a data center?
Fiber & Copper Cable Infrastructure
Dress, Terminate/Splice
Patch & Label
Test & Certify
Rack & Stack
Troubleshoot & Repair
Audit, Document & Clean-up
Smart Hands
Cabinet configuration & ganging
Tray & trough Install
Sensor & lock install
Air flow reconfiguration
Answer this question: What services do we provide for wireless?
Design
In Buildings Wireless (IBW)
DAS
Small Cell
WiFi
Cable
Copper & Fiber to the Antenna
Optimize
Troubleshoot
Site survey w/ Ekahau or Air Magnet
Active
Passive
Exit
APoS (with a predictive survey)
Spectrum analysis
AP Install and reposition
Point to Point LAN Extension w/Ubiquiti
Point to Multi-point w/Ubiquiti
Answer this question: What services do we provide for copper?
Design
Cable
Dress & Terminate
Patch & Label
Test & Certify
Troubleshoot & Repair
Audit, Document & Clean-up
25 Pair
Coax
Answer this question: What services do we provide related to fiber?
Design
fiber plant for the enterprise
Cable
office
warehouse
data center
Dress & Terminate
rack & wall mount panels cassettes, adapters
cabinets
racks
LAN Rooms
MUTOA
Fiber Head Ends
enhanced management frames (CommScope)
centrix system (Corning)
Splice
fiber to fiber
fiber to pigtail
fiber to splice on connector
Pathway
FiberGuide (CommScope)
Patch & Label
Test & Certify
Troubleshoot & Repair
Audit, Document & Clean-up
Air Blown Fiber
design the plant
install FuturePath (microtube distribution system)
jet the fiber
terminate and test
Powered Fiber
analyse & design
commission solution
PON
design enterprise Passive Optical Network (PON) fiber-based access local area networks inside buildings and across campus
deploy PON
used to connect computers, phones, servers, Wi-Fi, building automation, building monitoring, building intelligence, security surveillance, all forms of enterprise video and all IP/Ethernet devices within the digital ceiling and Internet of Things realm.
BiDi/Simplex Singlemode Fiber
extend client network to demarc
extend carrier demarc to client space
We offer a wide range of enterprise fiber optic, copper, wireless and data centre services and solutions. These include but are not limited to:
plant design
cabling
patching
gear installation - AP's, Routers, Switches, SAN devices,
upgrades and maintenance
audits
labelling
circuit tracing & documentation
certification testing
scheduled & emergency repairs
site surveys
smart hands services
limited Outside Plant Solutions (OSP) consultation - to connect hard to reach area's within the scope of enterprise connectivity (powered fibre, Wireless PtP/PtMP).
Digital signage and media displays is another area we are supporting customers with.
Limited network solutions with configurations and support using Ubiquiti products for small businesses
Working safely, we quickly establish and maintain a safe environment for our customers and technicians. We believe in doing a job thoroughly and completely so we never have to go back for rework.
Your satisfaction is very important to us!